Common Planner
K–12 Standards

Plumbing: Grades 9, 10, 11, 12

Other Arkansas CTE sets

Practicing Safety on the Plumbing Site

  • 1.1

    Define terminology related to hazardous materials

    1. 1.

      Use terms appropriately in context1.1.1

  • 1.2

    Identify the chemical risks associated with plumbing occupations, referencing Material Safety Data Sheets

    1. 1.

      Prepare a list of common chemical hazards associated with the plumbing occupation (e.g., primers, acids, cement, flux, and pipe joint compound, as well as others listed on MSDS).1.2.1

Introduction to Plumbing

  • 2.1

    Define terminology related to safety in plumbing

    1. 1.

      Use terms appropriately in context2.1.1

  • 2.2

    Outline the historical development of plumbing

    1. 1.

      Relate the historical landmarks in the development of the plumbing trade, beginning with its origins (4000 B.C.)2.2.1

    2. 2.

      Relate the impact of Roman aqueducts on features of modern plumbing systems2.2.2

    3. 3.

      Discuss sanitation problems of the Middle Ages2.2.3

    4. 4.

      Discuss the development of modern sanitation systems2.2.4

  • 2.3

    Describe the importance of plumbers in modern society

    1. 1.

      Depict ways that plumbing relates to sanitation and public health2.3.1

    2. 2.

      Demonstrate how improper plumbing and sanitation impacts environmental quality2.3.2

  • 2.4

    Identify the functions of water supply systems

    1. 1.

      Discuss the importance of clean water and its relationship to human health and life span2.4.1

    2. 2.

      Explain ways a residential water supply system can be contaminated2.4.2

  • 2.5

    Identify the functions of sewage treatment systems

    1. 1.

      Describe the components in a residential sewage disposal system2.5.1

    2. 2.

      Discuss environmental impacts of improper sewage discharge2.5.2

Using Math in Plumbing

  • 3.1

    Define terminology related to math application in plumbing

    1. 1.

      Use terms appropriately in context3.1.1

  • 3.2

    Identify various pipe dimensions and measurements

    1. 1.

      Demonstrate the ability to read a rule accurately to within +/- 1/32 inch3.2.1

    2. 2.

      Show how to measure a pipe end-to-end, center-to-center, and face-to-face3.2.2

    3. 3.

      Determine methods of sizing and specifying various types of pipe used in plumbing3.2.3

  • 3.3

    Select mathematical calculations related to plumbing, using feet and inches as the units of measure

    1. 1.

      Solve various mathematical calculations, using feet and inches3.3.1

    2. 2.

      Perform various addition, subtraction, and conversion problems applicable to plumbing scenarios3.3.2

  • 3.4

    Identify area and volume related to plumbing

    1. 1.

      Calculate the area of various shaped spaces3.4.1

    2. 2.

      Calculate the volume of various shaped spaces3.4.2

    3. 3.

      Calculate the volume of liquid that a round or square tank can hold3.4.3

  • 3.5

    Explain the concept of fitting allowance

    1. 1.

      Discuss reasons for fitting allowances used in plumbing3.5.1

    2. 2.

      Calculate the fitting allowance for various plumbing fittings3.5.2

Interpreting Plumbing Construction Drawings

  • 4.1

    Define terminology related to interpreting plumbing construction drawings

    1. 1.

      Use terms appropriately in context4.1.1

  • 4.2

    Identify specific plumbing fixtures depicted on plumbing construction drawings

    1. 1.

      Use standard fixtures on a residential construction drawing4.2.1

    2. 2.

      Use standard fixtures on a commercial construction drawing4.2.2

  • 4.3

    Select items to create a fitting/material list

    1. 1.

      Construct a fitting/material list from construction drawings4.3.1

    2. 2.

      Use the correct size pipe and fittings necessary to connect fixtures based on construction drawings4.3.2

    3. 3.

      Verify that plumbing fixture clearances meet code standards4.3.3

    4. 4.

      Calculate the cost of plumbing materials for various rooms or jobs4.3.4

  • 4.4

    Identify isometric plumbing drawings

    1. 1.

      Explain notes and dimensions used on isometric plumbing drawings4.4.1

    2. 2.

      Identify fixture and material symbols used on isometric plumbing drawings4.4.2

    3. 3.

      Compare isometric plans to floor plans and other construction drawings4.4.3

Identifying Tools Used in Plumbing

  • 5.1

    Define terminology related to identifying tools used in the plumbing industry

    1. 1.

      Use terms appropriately in context5.1.1

  • 5.2

    Identify hand tools used in plumbing

    1. 1.

      Demonstrate the uses for common hand tools in the plumbing industry5.2.1

    2. 2.

      Demonstrate the uses for specialized hand tools in the plumbing industry5.2.2

    3. 3.

      Use proper hand tools for specific tasks in the plumbing industry5.2.3

  • 5.3

    Select power tools used in plumbing

    1. 1.

      Demonstrate the uses for common power tools in the plumbing industry5.3.1

    2. 2.

      Demonstrate uses for specialized power tools in the plumbing industry5.3.2

    3. 3.

      Use proper power tools for specific tasks in the plumbing industry5.3.3

Cutting and Joining Pipe

  • 6.1

    Define terminology related to cutting and joining pipe

    1. 1.

      Use terms appropriately in context6.1.1

  • 6.2

    Describe cutting a cast iron pipe

    1. 1.

      Cut cast iron pipe to length within +/- 1/16 inches6.2.1

    2. 2.

      Demonstrate techniques to cut cast iron pipe square in a manner that prevents crushing6.2.2

  • 6.3

    Explain cutting and deburring copper tubing

    1. 1.

      Demonstrate cutting copper tubing with a tubing cutter to correct length within +/- 1/16 inches6.3.1

    2. 2.

      Use a deburring tool on copper tubing according to industry guidelines6.3.2

  • 6.4

    Describe cutting plastic pipe with a PVC/ABS saw or approved cutter

    1. 1.

      Demonstrate cutting PVC/ABS pipe with approved cutting tool with end square and to correct length within +/- 1/16 inches6.4.1

    2. 2.

      Cut a pipe with a hacksaw with end square and to correct length within +/- 1/16 inches6.4.2

    3. 3.

      Deburr PVC/ABS pipe6.4.3

  • 6.5

    Explain the purpose of cutting and reaming steel pipe

    1. 1.

      Demonstrate cutting steel pipe to proper length within +/- 1/16 inches, using hand pipe cutters6.5.1

    2. 2.

      Demonstrate cutting steel pipe to proper length within +/- 1/16 inches, using power pipe cutters6.5.2

    3. 3.

      Discuss reaming steel pipe according to industry guidelines6.5.3

  • 6.6

    Describe how to join cast iron pipe using rubber-type seal and no-hub connectors

    1. 1.

      Align cast iron pipe to receive connector6.6.1

    2. 2.

      Check to ensure band and seal are aligned prior to tightening connector6.6.2

    3. 3.

      Check to ensure no-hub connector is torqued according to plumbing code6.6.3

  • 6.7

    Label a copper pipe (tubing) assembly with solder joints

    1. 1.

      Clean pipe using sandpaper or a wire brush6.7.1

    2. 2.

      Apply flux with brush to fittings and pipe6.7.2

    3. 3.

      Apply heat for solder according to industry guidelines6.7.3

    4. 4.

      Apply solder to joint according to industry guidelines6.7.4

    5. 5.

      Test piping assembly for leaks6.7.5

    6. 6.

      Wipe excess flux from joint after assembly cools6.7.6

  • 6.8

    Describe joining plastic pipe (tubing) to fittings using solvent method

    1. 1.

      Use various primer, cement, and solvent types for various piping materials6.8.1

    2. 2.

      Apply primer/cement/solvent to pipe and fittings according to industry guidelines6.8.2

    3. 3.

      Demonstrate inserting pipe and assembling joints according to industry guidelines6.8.3

    4. 4.

      Test pipe assembly for leaks6.8.4

  • 6.9

    Describe how to join copper pipe (tubing) using compression fittings

    1. 1.

      Use various compression fittings for copper pipe6.9.1

    2. 2.

      Clean compression fittings and pipe according to industry guidelines6.9.2

    3. 3.

      Tighten compression fittings according to manufacturer's specifications6.9.3

    4. 4.

      Test piping assembly for leaks6.9.4

  • 6.10

    Outline how to join copper pipe (tubing) to fittings using flare method

    1. 1.

      Select appropriate flare fitting for use on copper pipe6.10.1

    2. 2.

      Use a flaring tool and block to prepare a flare joint on copper pipe6.10.2

    3. 3.

      Clean fitting and pipe for a flare joint according to industry guidelines6.10.3

    4. 4.

      Tighten flare fitting according to manufacturer's specifications6.10.4

    5. 5.

      Test pipe assembly for leaks6.10.5

  • 6.11

    Explain how to join plastic pipe (tubing) to fittings using crimp ring method

    1. 1.

      Determine tools to use with crimp ring method of joining plastic pipe6.11.1

    2. 2.

      Discuss uses for crimp ring fittings for copper pipe6.11.2

    3. 3.

      Clean fittings and pipe according to industry guidelines6.11.3

    4. 4.

      Install crimp ring according to manufacturer's specifications6.11.4

    5. 5.

      Test pipe assembly for leaks6.11.5

  • 6.12

    Describe how to join plastic pipe (tubing) to fittings using clamp/insert fittings method

    1. 1.

      Determine tools to use with clamp/insert fitting method6.12.1

    2. 2.

      Discuss uses for clamp/insert fitting for copper pipe6.12.2

    3. 3.

      Clean clamp/insert fittings and pipe according to industry guidelines6.12.3

    4. 4.

      Install clamp/insert fitting according to manufacturer's specifications6.12.4

    5. 5.

      Test pipe assembly for leaks6.12.5

  • 6.13

    State how to join pipe with flexible sleeve couplings

    1. 1.

      Clean fitting and pipe to receive flexible sleeve couplings according to industry guidelines6.13.1

    2. 2.

      Discuss uses for flexible sleeve couplings for copper pipe6.13.2

    3. 3.

      Install and torque flexible sleeve couplings according to industry guidelines6.13.3

    4. 4.

      Test pipe assembly for leaks6.13.4

  • 6.14

    Explain how to thread steel pipe with power-driven thread cutter

    1. 1.

      Set up and install dies for threading steel pipe with power-driven thread cutter6.14.1

    2. 2.

      Apply correct procedure to produce pipe with typical threads6.14.2

    3. 3.

      Clean and deburr threads on steel pipe threaded with power-driven thread cutter6.14.3

  • 6.15

    Outline how to thread steel pipe using hand thread cutter and oilers

    1. 1.

      Demonstrate setting up and installing dies for threading steel pipe with hand thread cutter and oiler6.15.1

    2. 2.

      Create a pipe with typical threads6.15.2

    3. 3.

      Clean and deburr threads on steel pipe threaded with hand thread cutter and oilers6.15.3

  • 6.16

    Name the steps involved in joining pipe of dissimilar materials

    1. 1.

      Discuss methods and situations to connect pipe of dissimilar materials6.16.1

    2. 2.

      Join pipe of dissimilar materials6.16.2

    3. 3.

      Test pipe assembly for leaks6.16.3

Supporting and Hanging Pipe

  • 7.1

    Define terminology related to supporting and hanging pipe

    1. 1.

      Use terms appropriately in context7.1.1

  • 7.2

    Identify types of anchors and straps for commercial plumbing applications

    1. 1.

      Use various types of anchors and straps used in attaching and hanging plumbing (including expansion anchors, inserts, Red Head anchors, clevis hangers, split-ring hangers, beam clamps, riser clamps, wire hooks, perforated straps, and tube straps)7.2.1

    2. 2.

      Explain plumbing code requirements associated with the use of hangers and anchors7.2.2

  • 7.3

    Label parts used to install backing and ledger supports for plumbing fixtures

    1. 1.

      Cut back and ledger to correct size, using appropriate material to fit snugly in space7.3.1

    2. 2.

      Install backing and ledger supports properly positioned and level7.3.2

    3. 3.

      Check assembly for solid attachment to frame of structure7.3.3

  • 7.4

    Describe the installation of pressure pipe, using various supports, including wire pipe hooks, tube talon, or tube straps

    1. 1.

      Discuss reasons for spacing guidelines with various hangers7.4.1

    2. 2.

      Install space hangers according to manufacturer's guidelines for a specific application7.4.2

    3. 3.

      Install pressure pipe, using various supports7.4.3

  • 7.5

    Match DWV (drainage, waste, and vent) pipe with various types of supports (e.g., perforated strap, pipe hooks, and riser clamps)

    1. 1.

      Discuss reasons for accurate grade (slope) for DWV pipe7.5.1

    2. 2.

      Use grade DWV pipe according to code and industry guidelines7.5.2

    3. 3.

      Install appropriate supports for DWV pipe7.5.3

  • 7.6

    Describe the correct installation of pipe sleeves through a concrete or masonry wall

    1. 1.

      Install a pipe sleeve through a concrete or masonry wall7.6.1

    2. 2.

      Correctly caulk a pipe sleeve7.6.2

Installing Waste and Soil Pipes

  • 8.1

    Define terminology related to the installation of waste and soil pipes

    1. 1.

      Use terms appropriately in context8.1.1

  • 8.2

    Outline a procedure for roughing-in a DWV (drainage, waste, and vent) pipe assembly of PVC/ABS piping

    1. 1.

      Discuss the elements in a DWV system to include water closet, lavatory, bathtub, shower, kitchen or bar sink, and washing machine8.2.1

    2. 2.

      Rough-in a DWV pipe assembly for kitchen, bathroom, or laundry room installation8.2.2

  • 8.3

    Describe how to calculate and set waste and soil pipes

    1. 1.

      Calculate slope for plumbing runs8.3.1

    2. 2.

      Discuss techniques and instruments used for setting level and slope for waste and soil pipe8.3.2

    3. 3.

      Install waste and soil pipes according to measurements for level and slope in accordance with plumbing code8.3.3

  • 8.4

    Describe how to install a water closet flange

    1. 1.

      Lay out the measurements for installation of a water closet flange8.4.1

    2. 2.

      Inspect pipe layout in accordance with plumbing code, manufacturer's specifications blueprints, and ADA (Americans with Disabilities Act)8.4.2

  • 8.5

    Explain the purpose of a back flow valve

    1. 1.

      Determine situations in which back flow prevention devices should be used8.5.1

    2. 2.

      Describe the purpose for a back flow valve8.5.2

    3. 3.

      Discuss installation techniques for a back flow valve8.5.3

    4. 4.

      Discuss the consequences of faulty installation of a back flow valve8.5.4

  • 8.6

    Describe how a drainage system standing water/air leak test works

    1. 1.

      Water/air leak test a drainage system according to the plumbing code8.6.1

    2. 2.

      Perform a drainage system water/air leak test according to industry guidelines8.6.2

Components of a Water Distribution System

  • 9.1

    Define terminology related to the components of a water distribution system

    1. 1.

      Use terms appropriately in context9.1.1

  • 9.2

    Describe procedures and materials used to install a building's water service

    1. 1.

      Discuss the components in a building's water service9.2.1

    2. 2.

      Use procedures for installing a building's water meter9.2.2

    3. 3.

      Identify various types of main shutoff valves (e.g., gate, ball, butterfly)9.2.3

    4. 4.

      Use procedures for installing main shutoff valves for a building9.2.4

    5. 5.

      Explain advantages of various types of main shutoff valves9.2.5

    6. 6.

      Shut off and turn on the water supply to a building9.2.6

  • 9.3

    Describe the installation of a water distribution system

    1. 1.

      Demonstrate installation procedures for hard-drawn copper, CPVC (chlorinated polyvinyl chloride), and PEX (cross-linked polyethylene) components in a water distribution system9.3.1

    2. 2.

      Install water system components according to construction drawings, manufacturer's specifications, and plumbing code9.3.2

    3. 3.

      Lay out pipe for a residential water distribution system9.3.3

    4. 4.

      Rough-in water supply components for a washing machine, lavatory, kitchen sink, tank-type water closet, and a bathtub or shower9.3.4

  • 9.4

    Explain how air pressure and water pressure tests are conducted

    1. 1.

      Discuss procedures for an air pressure leak test of a pipe assembly9.4.1

    2. 2.

      Discuss procedures for a water pressure leak test of a pipe assembly9.4.2

    3. 3.

      Perform an air pressure leak test on a pipe assembly9.4.3

    4. 4.

      Perform a water pressure leak test on a pipe assembly9.4.4

  • 9.5

    Describe how to insulate water supply lines

    1. 1.

      Discuss various insulating materials designed for water supply lines9.5.1

    2. 2.

      Demonstrate procedures for installing various insulating materials on water supply lines9.5.2

    3. 3.

      Discuss advantages and disadvantages of pipe insulating materials9.5.3

    4. 4.

      Insulate a water supply line9.5.4

  • 9.6

    List examples of nail guard protection for pipe

    1. 1.

      Mark locations where nail guards should be installed for plumbing protection9.6.1

    2. 2.

      Determine size requirements for various nail guard installations9.6.2

    3. 3.

      Install nail guards9.6.3

Installing Plumbing Fixtures and Equipment

  • 10.1

    Define terminology related to installing plumbing fixtures and equipment

    1. 1.

      Use terms appropriately in context10.1.1

  • 10.2

    Outline how to install and trim out a lavatory

    1. 1.

      Discuss procedures for installing a wall-hung lavatory10.2.1

    2. 2.

      Install a countertop lavatory10.2.2

    3. 3.

      Install a lavatory fixture and faucet10.2.3

    4. 4.

      Inspect a lavatory installation to ensure it is secure, level, and plumb10.2.4

    5. 5.

      Install the water supply to a lavatory, and check for leaks10.2.5

  • 10.3

    Describe how to install and trim out a kitchen sink

    1. 1.

      Discuss procedures for installing a double kitchen sink10.3.1

    2. 2.

      Measure and verify the cutout for a sink is correct for size of sink unit10.3.2

    3. 3.

      Install a kitchen sink fixture and kitchen faucet according to manufacturer's specifications10.3.3

    4. 4.

      Perform inspection to verify sink is level10.3.4

    5. 5.

      Verify solid fit and appropriate seal at rim and countertop10.3.5

  • 10.4

    Explain how to install and trim out a water closet

    1. 1.

      Discuss procedures for installing a water closet10.4.1

    2. 2.

      Install a water closet fixture10.4.2

    3. 3.

      Install water control mechanisms for a water closet10.4.3

    4. 4.

      Inspect to verify installation is secure, level, and plumb10.4.4

    5. 5.

      Inspect to verify water closet wax ring has been installed correctly10.4.5

    6. 6.

      Demonstrate how to install a water supply to water closet, and check for leaks10.4.6

  • 10.5

    Describe installation of a garbage disposal

    1. 1.

      Discuss the installation procedures of a garbage disposal in a kitchen sink10.5.1

    2. 2.

      Install a garbage disposal, and check for leaks according to manufacturer's specifications10.5.2

  • 10.6

    Outline how to install an automatic dishwasher

    1. 1.

      Discuss how to set the dishwasher in the cabinet space, plumb and trim, and verify attachment of dishwasher to cabinet10.6.1

    2. 2.

      Install dishwasher drain according to installation instructions and plumbing code10.6.2

    3. 3.

      Install a water supply to dishwasher according to installation instructions and plumbing code10.6.3

    4. 4.

      Inspect cabinet installation, water supply, and drain for leaks10.6.4

  • 10.7

    Describe installation of a water heater

    1. 1.

      Discuss code considerations for installation of an electric water heater10.7.1

    2. 2.

      Discuss code considerations for installation of a natural gas water heater10.7.2

    3. 3.

      Install an electric water heater10.7.3

    4. 4.

      Install a natural gas water heater10.7.4

    5. 5.

      Inspect plumbing installation for leaks and appropriate water supply10.7.5

  • 10.8

    Describe how to trim out a tub and shower valve

    1. 1.

      Discuss the installation of a tub and shower valve10.8.1

    2. 2.

      Install a tub and shower valve10.8.2

    3. 3.

      Inspect to verify valve installation is straight, neat, and to manufacturer's specifications10.8.3

    4. 4.

      Inspect installation for leaks and appropriate water supply10.8.4

  • 10.9

    Outline installation of an outside water faucet

    1. 1.

      Discuss installation of an outside water10.9.1

    2. 2.

      Inspect installation for leaks and appropriate water supply10.9.2

Servicing and Repairing Plumbing Fixtures and Equipment

  • 11.1

    Define terminology related to servicing and repairing plumbing fixtures and equipment

    1. 1.

      Use terms appropriately in context11.1.1

  • 11.2

    Describe how to replace and adjust water control mechanisms for a water closet

    1. 1.

      Discuss procedures to replace water control mechanisms in a water closet11.2.1

    2. 2.

      Replace a water control mechanism11.2.2

    3. 3.

      Adjust the water control mechanisms11.2.3

    4. 4.

      Inspect installation for leaks, and verify proper function of water control mechanisms11.2.4

  • 11.3

    Outline replacement of a water closet flush valve

    1. 1.

      Discuss the removal and installation of a water closet flush valve11.3.1

    2. 2.

      Remove and install a water closet flush valve11.3.2

    3. 3.

      Replace a water closet tank gasket11.3.3

    4. 4.

      Inspect installation for leaks and appropriate water supply11.3.4

  • 11.4

    Identify how to troubleshoot, repair, or replace automatic flushing devices

    1. 1.

      Inspect to verify correct operation of an automatic flushing device11.4.1

    2. 2.

      Service an automatic flushing device11.4.2

    3. 3.

      Install an automatic flushing device in an existing fixture11.4.3

  • 11.5

    Describe how to operate a plumbing drain auger

    1. 1.

      Discuss how to operate a plumbing drain auger11.5.1

    2. 2.

      Use an auger to clean a drain11.5.2

  • 11.6

    Describe how to remove and replace a fixture trap

    1. 1.

      Discuss the procedure for removing and replacing a plumbing fixture trap11.6.1

    2. 2.

      Remove and replace a plumbing fixture trap11.6.2

    3. 3.

      Set a trap level with respect to seal11.6.3

    4. 4.

      Inspect installation for leaks11.6.4

  • 11.7

    Explain the repair or replacement of a washer-type faucet

    1. 1.

      Remove and replace a washer in a washer-type faucet11.7.1

    2. 2.

      Replace a washer-type faucet11.7.2

    3. 3.

      Check installation for leaks and appropriate water supply11.7.3

  • 11.8

    Describe repair or replacement of washerless faucets

    1. 1.

      Discuss removal and replacement of a washerless faucet (e.g., ball type, cartridge type, or ceramic disk type)11.8.1

    2. 2.

      Remove and replace a ball, cartridge, or disk in a washerless faucet11.8.2

    3. 3.

      Remove and replace a washerless faucet11.8.3

    4. 4.

      Inspect installation for leaks and appropriate water supply11.8.4

  • 11.9

    Describe how to repair or replace a shower diverter valve

    1. 1.

      Remove and replace a shower diverter valve11.9.1

    2. 2.

      Inspect installation for leaks and appropriate water supply11.9.2

  • 11.10

    Explain how to replace a bathtub waste and overflow pipe

    1. 1.

      Remove and replace a bathtub waste and overflow pipe11.10.1

    2. 2.

      Inspect installation for leaks11.10.2

  • 11.11

    Describe how to replace a bathtub shower arm and shower head

    1. 1.

      Replace a bathtub shower arm and shower head11.11.1

    2. 2.

      Inspect installation for leaks and appropriate water supply11.11.2

  • 11.12

    State standard troubleshooting problems pertaining to a garbage disposal

    1. 1.

      Discuss troubleshooting a garbage disposal11.12.1

    2. 2.

      Discuss causes for failure of garbage disposals11.12.2

    3. 3.

      Remove and replace a garbage disposal11.12.3

  • 11.13

    Describe key troubleshooting areas when determining whether to repair/replace a gas or electric water heater

    1. 1.

      Discuss the causes for failure of electric water heaters11.13.1

    2. 2.

      Explain the causes for failure of gas water heaters11.13.2

    3. 3.

      Troubleshoot water heater malfunctions, i.e., failure to heat, no pilot light, leaks, thermostat control11.13.3

    4. 4.

      Remove and replace a gas water heater11.13.4

    5. 5.

      Remove and replace an electric water heater11.13.5

    6. 6.

      Remove and replace gas or electric water heater11.13.6

  • 11.14

    Describe how to thaw frozen water pipes

    1. 1.

      Discuss safe procedures for thawing frozen water pipes11.14.1

    2. 2.

      Thaw frozen pipes using standard cautionary steps11.14.2

  • 11.15

    Identify procedures to install a plumbing repair coupling

    1. 1.

      Explain situations in which plumbing repair couplings may be used11.15.1

    2. 2.

      Install a plumbing repair coupling11.15.2

    3. 3.

      Inspect installation for leaks11.15.3

Career and Technical Student Organizations (SkillsUSA/HOSA)

  • 12.1

    Define terminology related to student organizations

    1. 1.

      Use terms appropriately in context12.1.1

  • 12.2

    Outline a self-assessment, and identify individual learning styles

    1. 1.

      Show individual strengths12.2.1

    2. 2.

      Show areas in need of improvement12.2.2

  • 12.3

    Describe self-motivation techniques, and establish short-term goals

    1. 1.

      Prepare a list of short-term goals12.3.1

    2. 2.

      Discuss ways to change or improve lifestyle, appearance, and behavior12.3.2

  • 12.4

    Give examples of individual time-management skills

    1. 1.

      Prepare and maintain a time journal12.4.1

    2. 2.

      Outline ways to improve time-management skills12.4.2

  • 12.5

    Predict future occupations

    1. 1.

      Research the Internet to explore career opportunities in specified fields of study12.5.1

    2. 2.

      Prepare a presentation on a specified career area12.5.2

  • 12.6

    Identify the customer

    1. 1.

      Differentiate between external and internal customers12.6.1

    2. 2.

      Identify factors that contribute to poor customer relationships12.6.2

  • 12.7

    Identify the benefits of doing a community service project

    1. 1.

      Outline ways to become involved in the community12.7.1

    2. 2.

      Develop a community service project12.7.2

  • 12.8

    Describe effective communication with others

    1. 1.

      Note personal barriers to listening12.8.1

    2. 2.

      Relate a personal plan to overcome barriers to listening12.8.2

  • 12.9

    Give locations for a shadowing activity

    1. 1.

      Summarize and relate an experience of job shadowing activity12.9.1

  • 12.10

    Identify the components of an employment portfolio

    1. 1.

      Present parts of a portfolio12.10.1

    2. 2.

      Compile a personal employment portfolio for an interview12.10.2

  • 12.11

    List proficiency in program competencies

    1. 1.

      Construct an interpersonal competency assessment12.11.1

  • 12.12

    Describe how to measure/modify short-term goals

    1. 1.

      Discuss how to pursue short-term goals12.12.1

  • 12.13

    Identify stress sources

    1. 1.

      Prepare a list of personal stress sources12.13.1

    2. 2.

      Outline techniques to cope with individual sources of stress12.13.2

  • 12.14

    Identify characteristics of a positive image

    1. 1.

      List behaviors and traits that lead to a positive image12.14.1

    2. 2.

      Note behaviors and traits that lead to a negative image12.14.2

  • 12.15

    Describe how team skills can be applied to a group project

    1. 1.

      Form a team to develop a class project12.15.1

  • 12.16

    Outline how to observe and critique a meeting

    1. 1.

      Attend a formal meeting held in the community12.16.1

    2. 2.

      Prepare a critique of the meeting attended12.16.2

  • 12.17

    List business meeting skills

    1. 1.

      Relate the basic rules required to ensure an orderly and business-like meeting12.17.1

    2. 2.

      Demonstrate with role-playing appropriate meeting skills12.17.2

  • 12.18

    Outline a survey for employment opportunities

    1. 1.

      Compile information on a particular employment opportunity of interest12.18.1

    2. 2.

      Perform an Internet search of a specific career area12.18.2

  • 12.19

    Select a professional journal for review, and develop a three-to five-minute presentation

    1. 1.

      Prepare a presentation on the content, purpose, and distribution of a particular professional journal12.19.1

  • 12.20

    Identify customer expectations

    1. 1.

      List customer expectations12.20.1

    2. 2.

      Discover the consequences of unmet customer expectations12.20.2

  • 12.21

    List parts of a job application

    1. 1.

      Prepare a job application from various businesses in the community12.21.1

    2. 2.

      Demonstrate a mock job interview12.21.2

  • 12.22

    Outline your employment portfolio

    1. 1.

      Construct a personal employment portfolio12.22.1

  • 12.23

    Identify supervisory and management roles in an organization

    1. 1.

      Prepare an organizational chart12.23.1

    2. 2.

      Outline the responsibilities of managers and supervisors12.23.2

  • 12.24

    Outline safety issues

    1. 1.

      Research safety issues within a given career area12.24.1

Frequently asked questions

What grade levels do these standards cover?
Grade 9, Grade 10, Grade 11, and Grade 12
When were these standards adopted?
2007
Where can I read the official document?
Plumbing

Keep exploring

Keep exploring CTE standards

Sibling grade bands, other subjects in this jurisdiction, and the same subject across other states.

More Arkansas CTE sets

CTE